The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.6 kg of refrigerant with a CO2 equivalent of 2.288 metric tons.

Peak Torque - 1200 rpm - SAE J1995 - 1275 lb-ft

Maximum net power - 1600 rpm - SAE J1349 - 298 hp

Maximum net power - 1600 rpm - ISO 9249 - 298 hp

Peak Torque - 1200 rpm - ISO 14396 - 1260 lb-ft

Maximum net power - SAE J1349 / ISO 9249 - 298 hp

Weights

Operating Weight - 51,176 lbs.

Note - * For general purpose buckets with a volume of 4.2 m3 (5.5 cubic feet) with BOCE.

Operating Weight * - 51,176 lbs.

Buckets

Bucket capacity - 2.5-9.2 m? (3.25-12.0 yard?)

Hydraulic system

Hydraulic cycle time - total - 10.1 s

Aggregate System - Maximum Operating Pressure - 4496 psi

Unit pump type - variable displacement piston

Unit system - maximum pump capacity at 1600 rpm - 103 gal / min

Hydraulic cycle time - rated payload - rise from transport position - 6.1 s

Hydraulic cycle time - nominal payload - dump, at maximum lift - 1.4 s

Hydraulic Cycle Time - Rated Payload - Lower, Empty, Lower - 2.6 s

Hydraulic Cycle Time - Rated Payload - Total - 10.1 s

Implement System - Maximum Pressure - Option 3rd / 4th Function - 2999 psi Inch

Unit system - maximum flow rate - option 3rd / 4th function - 69 gal / min

Operational characteristics

Note (1) - For the machine configuration defined in the "Weight" section.

Note (2) - Full compliance with ISO 143971: 2007, sections 1 to 6, which requires a 2% check between calculations and tests.

The strength of the gap - 38,984 pounds

Static Tipping Load - 37 Degree Full Turn - Tire Deflection - 32,329 lbs

Static Tipping Load - 37 Degree Full Turn - No Tire Deflection - 34,873 lbs

Service replenishment options

Cooling system - 19 gal

Fuel Tank - 82.7 Gallons

Carter - 6.5 gal

DEF Tank - 4.4gal

Hydraulic tank - 33 gal

Gearbox - 15.9gal

Differential - Last gear - front - 15.1 gal

Differential - Last gear - Rear - 15.1gal

NOTE - * Must comply with the requirements laid down in ISO 22241-1.

DEF Tank * - 4.4gal

Sound

Note (1)

Sound values are for specific operating conditions only.

Note (2)

Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan.

Note (3)

Hearing protection may be necessary when the machine is operated with a cab that is not properly serviced.

At maximum cooling fan speed - Sound pressure level of the operator (ISO 6396: 2008) - 67 dB (A)

The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 107 dB (A)

With maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 76 dB (A) *

At a cooling fan speed of 70% of the maximum value - the sound pressure level of the operator (ISO 6396: 2008) ** - 67 dB (A)

At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 105 LWA ***

External sound power level - ISO 6395: 2008 - 107 dB (A)

External Sound Pressure Level - SAE J88: 2013 - 76 dB (A)

Operator sound pressure level - ISO 6396: 2008 - 67 dB (A)

Note (4)

Hearing protection may be required when doors and / or windows are open for extended periods or in noisy environments.

Taxi

ROPS / FOPS - ROPS / FOPS comply with ISO 3471 and ISO 3449 Level II

Bucket capacity

Bucket volume - 3.20-7.40 m3 (4.19-9.68 m3)

Dimensions - High Lift

Height - Top Hood - 9.3 Feet in

Height - Top of Exhaust Pipe - 11.6 Feet

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line from the rear axle to the edge of the counterweight is 8.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total length - without bucket - 26.6 feet in

Hinge axis height at maximum lift - 15.8 ft.

Lift clearance at maximum lift 13.6 ft.

Stand back - maximum lift - 71 degrees

Stand back - bearing height - 49 degrees

Stand back on the ground - 39 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinge axis height when carrying - 2.6 feet in

Maximum Width Over Tires - 9.9 Feet in

Dimensions - Standard Lift

Height - Top Hood - 9.3 Feet in

Height - Top of the exhaust pipe

11.6 feet in

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line of the rear axle to the edge of the counterweight is 7.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total Length - Without Bucket - 24 Feet

Hinge axis height at maximum lift - 14 ft.

Lifting arm clearance at maximum lift - 12 ft.

Stand back - maximum lift - 62 degrees

Stand back - bearing height - 50 degrees

Stand back on the ground - 42 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinged finger height when carrying - 2.1 feet in

Maximum Width Over Tires - 9.9 Feet in

Engine - Tier 4 Final / Stage IV

Emissions - Level 4 / Stage IV